NOVA Digital Bacteriological Incubator – Microprocessor Based PID Control is specifically design to cater the needs in Laboratory, Chemicals, Quality Control, R & D & Analytical, Pathological & Bacteriological Test etc. etc.
SALIENT FEATURES:
Portable & Light Weight.
Cerwool Insulation.
Sensitive temperature sensor.
Bright LED Display.
Kanthal A-1 heating coil.
Easy operation and maintenance.
Front bottom control panel.
Powder coated paint.
Fast temperature attainment.
Power saving low wattage heaters.
LABORATORY TUBULAR FURNACE [CERAMIC TYPE]
APPLICATION:
Laboratory.
R & D.
Analytical.
Process.
Annealing.
Chemical.
Metallurgical.
Calibration
And Other Research application.
CONSTRUCTION:
“NOVA” Laboratory Tubular Furnace is having double chamber construction. Inner chamber is a high Alumina Ceramic tube and outer Mild Steel. Both the end of the furnace is covered by synthania machine sheets.
Cerwool insulation is provided to minimize heat loss. Specially designed heater coil surrounded on outer side of ceramic tube. The Tubular Furnace will generate and transfer the heat very fast with minimum heat loss and thus maximum temperature of 850/900 Deg. C can be achieved within less than an hour. Thus the system is power consumption saver.
CONTROL PANEL:
The control panel consisting of
Mains Switch.
Mains Indicator.
Digital Control System.
Heater ON/OFF Indication.
INCUBATORS AS PER CUSTOMER’S SPECIFICATION/DESIGN & SIZE CAN BE MFD.
The front of the furnace is also provided with high temperature resistive syndhania sheet.
TEMPERATURE RANGE
Ambient to 850/900 Deg. C.
TEMPERATURE DISPLAY
4 Digit LED.
TEMPERATURE CONTROL
Various type of Digital Controllers. Please refer the block “CONTROL SYSTEM” below.
CONTROL ACCURACY
+/-2% or better depend on types of Control Systems.
SENSORS
Cr/Al (K) Type.
POWER SUPPLY
230 Volts Single Phase AC.
# Mains ON/OFF Switch.
# Mains Indicator.
# Digital Temperature Indicator cum Controller (Microprocessor PID Control)
# Heater ON/OFF Indicator.
# A-Meter.
AVAILABLE IN FOLLOWING SIZES & CONTROL SYSTEMS:
S I Z E S
CONTROL SYSTEM BY….
ID MM
OD MM
LENGTH OF FURNACE
MICRO-CONTROL MODEL
PID CONTROL MODEL
PROG. CONTROL MODEL
55/60
140
300mm
Accu.+/-3%FSD
Accu.+/-1.5%
FSD or better
Accu.+/-1.5% FSD or better
38 to 40
100-120
300mm
+/-1 Deg. C
NOTE :-
Tubular Furnace as per Customers Specification, Design/Application, Temperature Range and Size can be Manufacturing.
